Milwaukee M12 2505-20 Installation Head Holder
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Basic shelf mount with screw holes for three heads of the M12 2505-20 Installation Drill/Driver set.
- Rating
- 5 / 5
- Likes
- 9
- Downloads
- 68
- Makes
- 1
- Views
- 615
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution
Basic shelf mount with screw holes for three heads of the M12 2505-20 Installation Drill/Driver set. Screw holes should accept roughly a #8 wood screw, at least 1" long--I attached it using some drywall screws, but that's just what I had lying around. I don't have magnets or anything in it, but the chamfering lets the head sit in it just tight enough to not fall over.
I printed mine in PETG, with the flat back on the print bed. The 3MF file has my configuration in it, most likely--MK2.5S with Atomic Filament PETG--but you should be able to import just the models. The STL file is not in the correct orientation for printing.