1 / 5
topology-optimized shelf bracket 30 — zdjęcie 1
1 / 5

topology-optimized shelf bracket 30

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

This shelf bracket was created with the help of topology optimization.

Ocena
0 / 5
Polubienia
21
Pobrania
124
Wydruki
0
Wyświetlenia
826
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Standard Digital File License

This shelf bracket was created using topology optimization. There is a right and a left shelf bracket due to the deflection. I printed the shelf bracket with PLA and loaded it with 25 kg, it holds the load without any problems (no long-term tests). The board is 30 cm wide, 100 cm long and 1.8 cm thick.
The brackets are attached with 3 dowels each.

Tagi