Tiny Spool - Christmas ornament
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Tiny spool that can be a perfect 3D printing Christmas ornament
- Ocena
- 5 / 5
- Polubienia
- 121
- Pobrania
- 168
- Wydruki
- 16
- Wyświetlenia
- 1282
- Oceny
- 13
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Winter & Christmas & New Year's
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
I created this tiny Spool that can be printed easily and is easy to assemble.
Print instructions
The parts are designed to use a 0.4 nozzle or lower.
You can use 0.2 mm or lower layer height.
All the part are orientated correctly for the best printing experience.
This model doesn't require any support material.
Make sure to print 2 “Spool Side” to be able to make 1 spool
Assembly Instruction
All the parts should be able to snap together.
After you printed all the parts, you can easily push the side spool into the filament, if your tolerance are well tune it should be able as well to spin easily.