1 / 3
IQOS Stand for ILUMA PRIME and Terea Packs — zdjęcie 1
1 / 3

IQOS Stand for ILUMA PRIME and Terea Packs

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Stand for ILUMA PRIME and 5 Terea packs. Option to print with or without text, for a organized and minimalistic look.

Ocena
0 / 5
Polubienia
2
Pobrania
33
Wydruki
1
Wyświetlenia
749
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Organizers
Licencja
Creative Commons — Attribution

Step-by-Step 3D Printing Guide:

Prepare Your Files:

  • Import the STL files for the stand base and holder into your slicing software.
  • Ensure the models are oriented correctly for printing.

Set Up the Print:

  • For the holder, place it on its back in the slicer to facilitate easier printing.
  • Set the infill to 15% for a balance between strength and material use.
  • Adjust the layer height to 0.2mm for good detail and reasonable print time.

Support Settings:

  • Decide whether to print with or without supports:
    • Without Supports: Suitable for clean prints with minimal overhangs.
    • With Supports: Recommended for the stand base's recess, ensuring better print quality.
  • If using supports, enable them specifically for the recess area of the stand base.

Print the Parts:

  • You have two options:
    • Print Separately: Print the stand base and holder separately for greater control and precision.
    • Print Together: If your printer has sufficient build volume, you can print both the stand base and holder together to save time.
  • Load the files onto your 3D printer of choice. These settings are compatible with most standard 3D printers.
  • I successfully printed the parts using an Anycubic Kobra 3, but the files should work well with any printer that supports standard 3D printing formats.
  • Monitor the print progress to ensure everything is going smoothly.

Post-Processing:

  • Once the prints are complete, carefully remove the parts from the print bed.
  • If supports were used, gently remove them using appropriate tools.
  • Sand or clean any rough edges as needed.

Assembly:

  • If printed separately, align the holder with the stand base and assemble them.
  • Ensure a snug fit, and your IQOS stand is ready for use.

Tagi