1 / 3
IQOS Stand for ILUMA PRIME and Terea Packs
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Stand for ILUMA PRIME and 5 Terea packs. Option to print with or without text, for a organized and minimalistic look.
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 33
- Makes
- 1
- Views
- 749
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Organizers
- License
- Creative Commons — Attribution
Step-by-Step 3D Printing Guide:
Prepare Your Files:
- Import the STL files for the stand base and holder into your slicing software.
- Ensure the models are oriented correctly for printing.
Set Up the Print:
- For the holder, place it on its back in the slicer to facilitate easier printing.
- Set the infill to 15% for a balance between strength and material use.
- Adjust the layer height to 0.2mm for good detail and reasonable print time.
Support Settings:
- Decide whether to print with or without supports:
- Without Supports: Suitable for clean prints with minimal overhangs.
- With Supports: Recommended for the stand base's recess, ensuring better print quality.
- If using supports, enable them specifically for the recess area of the stand base.
Print the Parts:
- You have two options:
- Print Separately: Print the stand base and holder separately for greater control and precision.
- Print Together: If your printer has sufficient build volume, you can print both the stand base and holder together to save time.
- Load the files onto your 3D printer of choice. These settings are compatible with most standard 3D printers.
- I successfully printed the parts using an Anycubic Kobra 3, but the files should work well with any printer that supports standard 3D printing formats.
- Monitor the print progress to ensure everything is going smoothly.
Post-Processing:
- Once the prints are complete, carefully remove the parts from the print bed.
- If supports were used, gently remove them using appropriate tools.
- Sand or clean any rough edges as needed.
Assembly:
- If printed separately, align the holder with the stand base and assemble them.
- Ensure a snug fit, and your IQOS stand is ready for use.