1 / 3
Mortarboard / Doktorhut
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Mortarboard / Doctorate Hat as worn in doctoral ceremonies.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 46
- Wydruki
- 0
- Wyświetlenia
- 348
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Cosplay & Costumes in general
- Licencja
- Creative Commons — Attribution — Share Alike
Mortarboard
Additional materials:
- 4x M2x20 bolts
- 1x M5 heatset inset
- 1x M5 bolt for mount of decoration and tassel
- Rope for the tassel
- Any kind of decoration
Printing
- Open the Freecad file and change the “circle_inner_diameter” in the Spreadsheet according to the head size of the candidate.
- Change the “cap_size" according to the ego of the candidate (or the size of your print bed).
- Export brim and cap separately (preferably in step format)
- The included step and stl files should fit someone with average to small head size
- Print the brim in flexible filament (e.g. TPU 95A)
- Print the cap with normal filament (preferably PETG)
- Screw in the M2 bolts into the holes in the brim, be careful not to screw too far
- Cut away the head of the bolts
- Insert the heat inset in the center hole
- Press the cap with the holes into the ends of the bolts, it should be strong enough without glue
- There is a cap test object, where you can test if everything fits
- Decorate according to the candidates subject!