Broke Tag - NFC Tag Cover with Keychain and Magnet holes
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
NFC Tag Cover with Keychain and Magnet holes created for the Broke project.
- Ocena
- 0 / 5
- Polubienia
- 19
- Pobrania
- 335
- Wydruki
- 0
- Wyświetlenia
- 2136
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Noncommercial
I made this as part of my Broke project, an open source alternative to Brick.
If you liked this project, please consider buying a Brick - it's a cool concept.
This model can also be used as a generic way to carry around NFC tags - I included a logo-less version of the top part.
This model has two parts: Top and bottom.
- The bottom has holes for two 8x2mm magnets on the back, and a place for a 25mm NFC tag on the front.
- The top has a hole for attaching a keychain.
The two parts snap together, with a hole that allows to seperate them later on using a screwdriver.
I also added a parametrized version if anyone's interested. I originally made this much bigger, with 4 magnet holes, so there might be some funky parameters over there :)