Broke Tag - NFC Tag Cover with Keychain and Magnet holes
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
NFC Tag Cover with Keychain and Magnet holes created for the Broke project.
- Rating
- 0 / 5
- Likes
- 19
- Downloads
- 335
- Makes
- 0
- Views
- 2,136
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution — Noncommercial
I made this as part of my Broke project, an open source alternative to Brick.
If you liked this project, please consider buying a Brick - it's a cool concept.
This model can also be used as a generic way to carry around NFC tags - I included a logo-less version of the top part.
This model has two parts: Top and bottom.
- The bottom has holes for two 8x2mm magnets on the back, and a place for a 25mm NFC tag on the front.
- The top has a hole for attaching a keychain.
The two parts snap together, with a hole that allows to seperate them later on using a screwdriver.
I also added a parametrized version if anyone's interested. I originally made this much bigger, with 4 magnet holes, so there might be some funky parameters over there :)