Threaded Paper Towel / toilet paper holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
CHECK QUARTER TURN UPDATE ! Under-cabinet or wall mounted paper towel holder. Will fit toilet paper, even the big rolls.
- Ocena
- 5 / 5
- Polubienia
- 51
- Pobrania
- 255
- Wydruki
- 6
- Wyświetlenia
- 1846
- Oceny
- 7
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution
THANKS FOR YOUR INTEREST ! I SUGGEST YOU CHECK OUT THE QUARTER TURN VERSION HERE :
Needed an under-cabinet paper towel support solution. Did not like the compliant ones as I'm afraid they will age poorly.
Designed my own. The light green version has been in our kitchen now for 2 years and works very well for us. This one had shorter screws on both sides which made a quick change easy by removing only one screw and sliding the roll at an angle. Some rolls are a little narrower and wont hold as nicely, so I lengthened the screw for more stability but with two long screws it's impossible to quick change. So I recommend a short one and a long one ! Stable fit, only one to unscrew to change the roll, everyone is happy !
Will also work for toilet paper or shop towels, as long as the roll has the same inner diameter (needs to be at least 40mm).
I think those were printed on a Monoprice Select Mini V2, so you don't require a huge bed. PLA is perfect, make sure your retraction settings are well dialed as stringing or over-extrusion will be an issue with the threads. I went with 4 walls and 25% infill.
Let me know how it works for you !