Taller Print-in-Place Fidget Toggle Switch
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Zero assembly taller fidget switch for better fit in hand. Prints in around 45 minutes!
- Ocena
- 0 / 5
- Polubienia
- 11
- Pobrania
- 94
- Wydruki
- 0
- Wyświetlenia
- 551
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Toys & Games
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Print Settings (same as original design)
- Material: PLA
- Nozzle Size: 0.4mm
- Layer Height: 0.2mm
- Vertical Walls: 3
- Top/Bottom Layers: 5
- Infill: 15%
- Supports/Brims: No
The switch/toggle will be stuck after print, this is normal, you'll need to “break” the toggle from the axle. It should not take a ton of force and should be done using just the strength of your hands. The switch may be a bit stiff at first but after a bit of use it will smooth out.
Added loose version like what was available on the original model for those who may be having issues with the toggle fusing to the body. It is a little less clicky than the regular version.
For more information like more specific print instructions and alternate material information visit this link to the original model https://www.printables.com/model/883531-print-in-place-fidget-toggle-switch