1 / 5
Lightercase with feet
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Gadgets
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
I have designed this lighter case. It has two feet (the two feet are different) which are attached/glued to the underside. The feet must be positioned so that they fit into the semicircle and the arrow on the underside of the foot points outwards (see photo). There is also a hole on the underside of the lighter case to make it easier to take the lighter out again. I printed it with the standard printer setting Bambu Lab P1S (0.2 layer height).
If you are interested, please leave a rating and a make ;)