Windscreen Mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Windscreen Mount that clamps to an oval handrail using both flexible and non-flexible material.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 21
- Wydruki
- 0
- Wyświetlenia
- 299
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Mechanical Parts
- Licencja
- Creative Commons — Attribution — Noncommercial
Hi 3D printing friends! This design is a Windscreen clamp/mount that utilizes two materials.
The inner mount that contacts the handrail, as well as the flat gasket, is TPU. The outer portion of the mount was PETG.
The handrail this was designed for had an oval profile, 1" x 0.75". To design for different handrails you would need to just change the TPU print design.
The outer PETG part of the mount was designed to accept ¼-20 screws and nuts. The nuts will inset into the print and leave a clean look that can be tightened with just turning the associated screw or bolt.
The TPU parts had the following settings:
- 0.4 mm nozzle
- 0.2 layer height
- 4 perimeters
- 30% infill (honeycomb)
- No supports (printed holes facing upward)
- No raft or brim
The PETG parts had the following settings:
- 0.4 mm nozzle
- 0.2 layer height
- 5 perimeters
- 30% infill (gyroid)
- No supports (printed on their sides, holes will be fine)
- No raft or brim