1 / 1
Voron 2.4r2 rear left BOM filtered power inlet skirt without power switch — zdjęcie 1

Voron 2.4r2 rear left BOM filtered power inlet skirt without power switch

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

A remix of the rear left skirt for a Voron 2.4r2 with a filtered inlet, but without the power switch

Ocena
0 / 5
Polubienia
8
Pobrania
79
Wydruki
0
Wyświetlenia
351
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
GNU General Public License v3.0

On my Voron 2.4r2 I moved the power switch to the front left side skirt. Therefore I needed a left rear skirt for a BOM filtered inlet (TycoElectronics 10EGG1-1 (US & UK) or 10EGG1-2 (EU)) but without the power switch. Since I could not find one out there I modded my own based on the VoronDesign CAD files.

This stl replaces the power_inlet_filtered.stl in the /STLs/Skirts section of the VoronDesign Github. Because it is a universal skirt it fits the Voron 2.4r2 250, 300 and 350 size models.

Bill of Materials:

  • Hardware requirement are exactly the same as the stock filtered power inlet skirt
  • Some filament of your choice

I printed this in Polymaker ASA using standard Voron print settings. ABS will be fine also.

If you have any questions or comments please let me know. Let me know how your print turned out by posting a make.

All credit for the original part goes to VoronDesign!

Tagi