Radxa Zero 3W case with 30mm fan. Screwless, just snap all.
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A simple and light case for the Radxa Zero 3W with a 30mm fan.
- Ocena
- 5 / 5
- Polubienia
- 6
- Pobrania
- 180
- Wydruki
- 1
- Wyświetlenia
- 1229
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution
ATTENTION! I RIPPED OFF MY SDCARD HOLDER WITH THE CURRENT DESIGN. BE CAREFULL!
I will update it ASAP.
I designed this to use with my OpenIPC FVP ground station but the case is generic and the step files allow you to modify it to your needs.
A simple and light case for the Radxa Zero 3W with a 30mm fan and enough clearance for heat sinks. No screws required.
Print the lid with the top at the heated bed.
UPDATE 30/08/2024: Increased the thickness from 1mm to 1.2mm. MUCH more sturdy…. Changed the button hole of the OpenIPC lid, and added the two lid options.