Speaker grill_protective plus 3D sound parametric fusion 360
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Speaker grill protective plus 3D sound parametric fusion 360
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 15
- Wydruki
- 0
- Wyświetlenia
- 299
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Living Room
- Licencja
- Creative Commons — Attribution
Sometimes Exhaust fans are dangerously placed with the potential to cause injury. This grill prevents direct contact with fan blades for such fans without a protective grill.
The grill is having 240 mm dia originally and thus will not fit on 220mm 3d printers. Hence it is divided into 3 equal-sized parts and printed separately.
Print settings are 0.4 mm nozzle, 0.2 mm layer height, and 10% infill, support is required but may not use bed adhesion.
All 3 parts took 6 hours total in anycubic neo.
Once printing is over the grill may be assembled using filament as rivets through the given side holes. For attaching to the speaker frame three holes are provided in the outer ring. It can be fastened using screws M3-8. Alternatively, it can be glued to the speaker frame.