Huawei Mesh Router-WS5800 UPS
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a UPS case, I made for the Huawei Mesh Wi-Fi router. It should work with other models with the same case style.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 9
- Wydruki
- 0
- Wyświetlenia
- 190
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Share Alike
I made this box for a UPS for Huawei's Wi-Fi Mesh routers. Specifically it has been tested with the WS5800 but should work with all routers with the same design.
The UPS fits nicely under the router and has a gap to avoid obstructing the router's cooling.
Parts needed:
12V 18650 UPS Board. It is non-specific, so any should work.
I used this one: TZT DC 12V/15V 24W 1A UPS Power Supply Module Uninterruptible Power Control Board 2S V4.0CN Charging Step Up Protection Module - AliExpress 502
18650 Batteries. The board that I used requires 2S, so I used 2 batteries, but any number between 1 and 4 batteries fit.
Model that I used is Samsung INR18650-35E.
Female 5.5x2.1mm DC Barrel Jack.
Male 5.5x2.1mm DC Barrel Jack. I used a right angle one, but a straight one works as well.
6x2mm Rubber Feet. These are not necessary, but help it stay in one place.
2pcs. 3x6mm Countersunk Screws.