Liczymy pasujące modele…
I wanted somewhere to securely backup my ever-growing pile of photos and documents, so I designed this small file/media server around the Framework 13 motherboard/battery. They're used in a pair for dual redundancy. Its main features are:…
Print this in PETG, ASA, or ABS to make sure it stays healthy in the sun. Printed the one in the photo over four years ago in PETG and it's still on the back of my father in laws truck. Search the other repository for questions or more…
i needed a bracket to mount my backup camera to the back of my camper. This is designed to fit over the existing center light with the cover removed. You can then mount a replacement center light to the outside of the bracket. It uses the…
This is not ready yet! DO NOT PRINT IT! It is just for share and test now. Later i'll publish when it is ready.
I created this so I could stack my Seagate Backup Plus drives and allow sufficient air flow. Print Settings Printer: Monoprice IIIP/Wanhao Duplicator I3 Rafts: No Supports: Yes Resolution: .200 Infill: 20 Notes: Supports to bed only…
Substitute for WELTON - INC Light fixture gasket on the back of a blue bird school bus. Print with TPU at a minimum. I use the word substitute as material composition is clearly not 1:1 Light fixture style may be on other industrial…
Soonish EV (https://soonishev.com/products/battery-post-relocator?_pos=1&_sid=6c0246f9c&_ss=r ) is selling aluminum battery adaptor posts so that a BT19BL-BS can be used to replace the oem rivian battery. I have made a cover and shim to…
This dinrail-mounted holder for any Plejd puck with the option to use Plejd's battery backup. The mount holds the lone puck snuggly when fully inserted, so it does not fall out. When using the battery backup, the mount holds the puck…
Paper backups fail. Ink fades. Hardware wallets break. This 3mm stamping jig is designed to help you create a durable, offline backup of a 12–24 word crypto seed phrase (or any critical secret) by stamping directly into stainless steel…
Simple camera holder for mx5 nc. 2 holes for screws and one hole for a cable. Remember to add some double-sided tape to make connection tight.
Alternate bracket for 13th? gen F150 backup camera so it faces backwards when the tailgate is down. Requires no extra hardware. I printed in PETG with 0.8mm nozzle
Ho scale (1:87) household backup generator. print closed or open for maintenance Category: Hobby
This clip is a perfect* soloution if you broke the orginal. It is a direct replacement and is very easy to install. Mine was broken when 2 of my "buddies" thought it would be funny to try and steal my tailgate. *I have yet to long term…
NOTE: every PlasmaCar/Bimba is different (especially the bolt hole). Adjust for your model (Fusion 3D file included with named parametric values). This model is a replacement wheel for the front “backup” wheel of a PlasmaCar/Bimba kids…
Attention: This is a reupload of the awesome filament swatch by thingiverse user venegade . I did not modify this model in any way, I just copied it over to printables as a backup in case the original goes missing. (And because I'm lazy…
I fly long range fpv airplanes and was always worried about crashing and not being able to find the plane. So I came up with this setup to keep the RX running even if the main battery is ejected. Depending on how you set it up you can…
This is intended to be used as a backup/replacement key for the old town auto pilot series. The safety switches use a single magnet switch per safety device. The standard products for the assembly are just 12mm magnets and a flat head 3mm…
Vertical rack mount for Seagate Backup Plus external HDD. This is used in combination with a NUC rack mount kit and fits in an empty slot. Step file is included so that the file can be edited to your needs. Print Settings Printer Brand:…
This is a holder for a spare CR2032 battery for a key fob or car alarm remote. This will probably work for a CR2025 or a CR2016 battery as well but may rattle a bit because of the different thickness of those batteries. The CR2032 fits…
This remix is adapted to the Junsun 720p backup camera, the original model needed a small tweak to fit this camera better. Just print and mount, great fit!
My Seagate was falling down quite often, so I decided to make a small and easy stand for it as there was no stand for this precise model of HDD here. Printed with Jet Black PLA. Feel free to do whatever you want with the model :-)
Du brauchst Metallplatten (85mm x 55mm) und 3mm Schlagstempel. Achte darauf das die Stempel eine Seitenlänge von 6mm haben. Hammer und eine Stahl Unterlage oder Ambos. Mach es nicht auf deinem Tisch.
Allows you to attach a modern wireless backup camera on your rearview mirror. You can use cable ties or velcro to mount. I tucked the power cable above my rear view mirror and wired to my uplifter switches. This means I can just swap out…
Remixed version of Perry Bean's design to allow for the use of cameras that have IR lights around the lens
I have a home automation system at home, and I already have an inverter on this system. The problem is that the internet box is a long way from the system, and everything breaks down when there's a power cut and the network goes down. So…
it is for skoda octavia 3 when you have backupcamera with mounting like on octavia 2
Um Gerüche aus dem Abfluss zu stoppen, habe ich den wasserlosen Siphon entworfen. Damit die Dichtigkeit an der Kugel gewährleistet ist, muss Folgendes gelten: Die Kugel muss sehr dicht mit der Wand abschließen. Dazu eine Metallkugel…
Seagate couldn't choose a worse USB connector for their drives (USB 3.0 Standard-B would be perfect, but it would cost them some cents more). It's already very flimsy out of the box…now imagine how it is after some plug/unplug and falling…
This camera attachment is for a Mini Cooper Countryman 2010-2016 (R60). No modifying the car needed. Just fasten it behind the number plate lighting (see pictures). The pictures are from an older version, but the idea is the same. I made…
Fits every car I currently see in the parking lot so it's probably universal. You'll need 2x m3 heated inserts with 5mm outer dia, and 2x m3x6mm screws. Included .step and freecad file if you need to customize it to whatever other camera
Uses this parts: UPS Board: https://es.aliexpress.com/item/1005005697558542.html?spm=a2g0o.order_list.order_list_main.29.add2194d9jzBLa&gatewayAdapt=glo2esp USB-C Adaptor…
This custom-designed bracket provides a seamless and secure mounting solution for a reverse backup camera on your 2012 M
Dodge Ram1500 Backup Camera Mount Year: 2015 Dodge Ram1500 (May fit other model years) Adapted to utilize existing holes for dash board coin area. Compatible for Type-S after market rear camera LCD, utilizing Bluetooth license plate…
Soonish EV (https://soonishev.com/products/battery-post-relocator?_pos=1&_sid=6c0246f9c&_ss=r ) is selling aluminum battery adaptor posts so that a BT19BL-BS can be used to replace the oem rivian battery. I have made a cover and shim to…
This is a lightweight remix of the original SAB iGoblin Pro backup capacitor / buffer pack mount. The solid plate has been replaced with a hex-pattern design to reduce weight while keeping the strength needed for secure mounting. I…
I got a new stereo head unit that had provisions for a backup camera So I went looking for something that looked good compared to the license plate mount ones. This is an emblem mounted backup camera for newer model Rangers and other Ford…
License Plate Light Housing Backup Camera Mount - Gen 3 Mitsubishi Montero/Pajero/Shogun. Drop-in replacement for the existing license plate plate light housing on a gen3 (2000, 2001, 2002, 2003, 2004, 2005, 2006) Mitsubishi Montero that…
A cover for this generic backup camera so it doesn't look as dangly. Affix with double sided tape. The back of this cover is open so it can be installed after the camera. Category: Camera
Unifi LTE Backup (Pro) Magnetic Mount A basic 3d print for magnetically mounting a Unifi LTE Backup Pro. I printed this in PETG, but other materials should work as well. Additional Materials: M3 x 3.0 Threaded Inserts Qty: 2 Link:…
This is a simple Wall mount for a Seagate Backup Plus Desktop Drive. Mine is a model SRD00F2, I don't know if it will fit other models or not.
This dinrail-mounted holder for any Plejd puck with the option to use Plejd's battery backup. The mount holds the lone puck snuggly when fully inserted, so it does not fall out. When using the battery backup, the mount holds the puck…
Paper backups fail. Ink fades. Hardware wallets break. This 3mm stamping jig is designed to help you create a durable, offline backup of a 12–24 word crypto seed phrase (or any critical secret) by stamping directly into stainless steel…
I WOULDNT RECOMMEND PRINTING THIS UNTIL IVE PRINTED IT AND TRIED IT MYSELF
Simple camera holder for mx5 nc. 2 holes for screws and one hole for a cable. Remember to add some double-sided tape to make connection tight.
This is a cap to install over the opening of the backup alarm on the 14th gen Ford F150. This installs with small dabs of silicone adhesive if you want to remove later. I two small drops of super glue which will keep this in place but I…
Unifi Ubquiti LTE Backup mounting bracket copied from original and measurements 1 to 1
Unifi uquiti LTE Backup Wall mount bracket adapted from my bracket creation to wall mount the unit
Alternate bracket for 13th? gen F150 backup camera so it faces backwards when the tailgate is down. Requires no extra hardware. I printed in PETG with 0.8mm nozzle
Ho scale (1:87) household backup generator. print closed or open for maintenance Category: Hobby
This clip is a perfect* soloution if you broke the orginal. It is a direct replacement and is very easy to install. Mine was broken when 2 of my "buddies" thought it would be funny to try and steal my tailgate. *I have yet to long term…
A protective enclosure for converting micro-USB 3.0 ports to USB-C ports on Seagate Backup Plus portable hard drives. Requires a male micro-USB 3.0 to female USB-C adapter with the same dimensions as these:…
I needed an easy way to mount my backup drive next to my mounted raspberry pi for a wall mounted out of the way offsite backup solution. I picked up a Seagate Backup Plus Portable 4tb drive and made the mount in inventor. I printed it…
This bracket goes in between the license plate light screws and the rear bumper. You might have to take the metal clips off your license plate light assembly first if you plan on using a bigger screw - I was going to just use the original…
I got a cheap dashcam from China that came with a remote backup camera. In my case, I didn't want to mount on the back bumper, but on the interior of my truck. I designed this simple bracket and mount to do the job. The bracket is matched…
Since there are now tons of face shield clones at thingiverse I decided to design a face shield band which allows a comfortable wearing of the no clamping versions like the very popular Prusa RC3. The belt should fit even lager heads up…
I created a Full printed enclosure for a raspberry pi (4 in my case). The main purpose for me it that i put SyncThing on this installation. This box can be put on a internet anyware you want and the drive will sync with your other drives.…
This is designed to hold a 18650 battery and USB mini/USB charge port taken from a cheap dollar store battery backup. The two side containers are sized to hold a 16x100mm glass vial to insulate heat and smell. I cut and glued the rubber…
so i need to mount this Rear view camera to my Misubishi Space star from 2015. it just clips in, so no hols drilled…
Lexus GX470 Backup Camera Mount This model is a simple 3D printable mount for attaching an aftermarket backup camera to the OEM mounting location on a 2006 GX 470 SUV. The mount was designed for use with this " NATIKA Backup Camera IP69K…
In case your butter spreader Main Screw tip breaks off, don't throw it away! This should be a fine replacement to the Extruder. Here's the part I'm talking about: http://www.thingiverse.com/make:161687 Category: Kitchen & Dining
Requires: Q25-Mini 5.8G 25MW 16CH VTX 600TVL CMOS 1/4 Micro FPV Camera 12V to 5V 3A 15W DC/DC Power Regulator - CPT-UL-1 Print instructions ASA 100% infill With supports where needed Glue hinge clips with cyanoacrylate
This pull out-push in tray is for mounting a New Haven LCD display that is used as a backup ECU information display. ECU data is normally displayed on PFD, if the PFD fails the backup ECU display tray can be pulled out to view ECU data.…
Had to change the oil at my Honda EU20i Backup generator and did not like to dirty it completeley! At YouTube I saw some videos that you could use a tube to change the oil. But none of the tubes I got at home fitted and so I created an…
Goodman handle for backup-lights from Polaris, Dir-Zone and Scubatech-Tekline. The holes are for 5mm bungee-cord. Feel free to use the scad-file to remix ist. Category: Sport & Outdoors
Remixed to fit for 31mm and 1.25inch Washers to Blockmit for Cold Wallet to Backup Crypto Seed Phrases
I bought a Garmin BC40 backup camera to put on the back of my RV. This unit came mounted to an aluminum bracket that attaches to your license plate. Since I wanted to have the camera in the middle of the back end of my RV, I created a…
I made these to angle my backup camera on my 2021 Polaris Ranger Northstar Crew after seeing that in the factory position, it points towards the ground and doesn't really give a good view behind the side by side. These are just two simple…
I had to cover a light switch, in order to attach the cover I made small inserts nuts that you can mount up front and then use these with parkers 3,5 mm. Printed in PETG, vertical ! infill 50%. Please like, subscribe and return your…
I needed a better way to mount my aftermarket backup camera was dying that I was replacing with another aftermarket backup camera with the same dimensions. I imagine the size is pretty close on all of these cheaper chinese models that are…
I needed a better way to mount my aftermarket backup camera was dying that I was replacing with another aftermarket backup camera with the same dimensions. I imagine the size is pretty close on all of these cheaper chinese models that are…
This is a bracket to replace the stock mounting bracket supplied with the value-priced Dual Electronics XCAM100 backup camera, commonly sold in major retail auto parts chains and online. This bracket utilizes the top two license plate…
--- THIS WILL IMPROVE YOUR 3D PRINTING QUALITY! --- Upon multiple requests I'm sharing this 3D printing enclosure files. Enclosure is made of Aluminium extrusions profiles, acrylic glass and wood sheet panels covered in carbon fiber…
This camera mount keeps the aftermarket camera centred and out of the way of the number plate.
Alright, hear me out… I don't even know why I made this thing. It's a mount/holder for an IDEAPLAY Battery back up for my phone and surface pro [Affiliate link incoming!! https://amzn.to/3yyzEvO ] I carry it around in my work bag, and…
My Interpretation of the knife as seen on Ep5 of the book of boba Category: 3D Printing
seagate backup plus vertical standfor seagate backup plus model SRD00f2
I was only able to find one bracket to mount the screen of my backup camera to the mirror of my truck but it didn't fit well, so I designed my own. This bracket it printed in 3 parts and then held together with 4 m4 screws. The screws for…
backup battery cover plate for TI-89 graphing calculators. Most likely works for different models of TI calculators as well! Printed in 0.15mm (quality) with supports on build plate for the small overhang on the tab and to make sure the…
This is a backup camera mount for an NC Miata with the Advanced Keyless Entry (AKE) package. It a derivative design originally posted by "kiddingme". It is designed around the Nakita backup camera and moment buttons available on Amazon.…
My gate automation system requires this special key to be used when there is no electricity. I lost it once and had to resort to using a wrench. I made these backups just in case. In case you have similar key, but the dimensions are…
Since running the wire during the middle of summer isn't an option, I made this replacement mount. I believe it will work with minor changes for any cylindrical camera. The trailer ball mount should be the same size for most vehicles.…
Vent Mount I added an aftermarket backup camera to my car, and I didn't like the mounting options that came with it. I designed a swiveling vent mounting kit that clips onto the vent and slides into the back of the camera screen. It works…
I used this SD Card: https://amzn.to/3FHGPoZ (Affiliate Link) I used this filaments: black https://amzn.to/40taHyX (Affiliate Link) white https://amzn.to/3G1ksex (Affiliate Link) Of course: No support needed!
Gridfinity screwdriver. Fits standard bit sizes. Comes in handy as a spare when needed. Print Settings Printer Brand: Flashforge Printer: Adventurer 3 Rafts: No Supports: No Shells: 2 Resolution: 0.30mm Infill: 75% - 3D Infil (for…
Made this backup camera bracket to hold my OEM Infiniti Q50 backup camera in my S13. This bracket and camera replace the trunk key lock with 180sx kouki taillights, requires some trimming of the backside of the center piece around the…
Vertical rack mount for Seagate Backup Plus external HDD. This is used in combination with a NUC rack mount kit and fits in an empty slot. Step file is included so that the file can be edited to your needs. Print Settings Printer Brand:…
This can be used either as a tray on a desktop or it can be mounted to a wall. Even though it was specifically designed for my own TP Link Deco and battery backup, I have included a version of the tray that doesn't have the inner dividers…
If you dont have a place to keep an extra roll, print this! Print the roll holder vertically with no supports. 10% or less infill. Print the bracket horizontally with supports. Bracket should hang off the toilet tank, under the lid. I…
This is a simple TPU printed weather shield that helps prevent rusting of the camera’s mounting bracket. There are two models: one’s flat faced and the other has a small light visor. They require one small zip-tie to lock in place. Print…
The carrier is sprinted with PETG. Use a landscape printing position so you don't need support. increase or decrease the size by 1% as needed. the camera must fit very tightly.
Connects a battery backup via relay. In my case I'm using a battery automatic switch module (https://www.amazon.com/gp/product/B07V5XYCGZ/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1) and a 12v step up converter to 24v…
I needed a specific size box to provide some coverage from the elements for my trucks backup camera. Truck is f150 with a tool cap thingy on top, so the camera is relocated to the top of the box. Gets dirty very easily and snow/rain…
These were made to cover the backup lights on Caravan Camper camper shells. The lights can be used as flood lights while camping so I made these to aim the light down and cover them from being looked straight into by accident. They are…
I got a Auto-Vox T9pro digital rearview mirror and dash came. The mount that came with it would move very easy if it got bumped and it did not look great. I made a mount that looked like it belonged on the car more. Printed in ASA used 6…
When using a red-dot on the Steambow AR-6 Stinger 2 you loose the ironsights. If you have the right-front picatinny rail and the magazine-cover with the picatinny rail you can now use these backup sights if the red-dot battery dies. Front…
![[BACKUP] Yet Another Filament Sample - Keycard Edition](https://media.printables.com/media/prints/1007268/images/7909122_2e48feef-1b95-4680-9a64-32f66d7f81e9_c8944d1f-8315-4478-a1ef-c5205e17e562/img_3569.jpeg)
