Wet PETG chrismas ornaments
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
If you have a roll of wet PETG, than is this what you need to print with it before you dry it!!
- Ocena
- 0 / 5
- Polubienia
- 12
- Pobrania
- 32
- Wydruki
- 0
- Wyświetlenia
- 532
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Winter & Christmas & New Year's
- Licencja
- Creative Commons — Attribution — Noncommercial
When you print these the way is described below, you wil get a amazing print with wet PETG that only takes 30 min or less!!
Printed with WET PETG with a 0.6 mm nozzle and 75% fan speed. You need to print it in vase-mode and you need a 3mm brim. If you want to put a light in it you doesn't need any bottem layers. The temps are going to differ on your filament, but you need to print it a bit hotter than normal to make it look better. I recoment to use translusent filament, but no translusent should also work.
When the print is done, use a LED tea light or something like that and see it shine. (DO NOT USE A REAL TEA LIGHT ONLY THE LED TYPE)
* For the star you need 5 times the point and 1 middel