Wet PETG chrismas ornaments
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
If you have a roll of wet PETG, than is this what you need to print with it before you dry it!!
- Rating
- 0 / 5
- Likes
- 12
- Downloads
- 32
- Makes
- 0
- Views
- 532
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Winter & Christmas & New Year's
- License
- Creative Commons — Attribution — Noncommercial
When you print these the way is described below, you wil get a amazing print with wet PETG that only takes 30 min or less!!
Printed with WET PETG with a 0.6 mm nozzle and 75% fan speed. You need to print it in vase-mode and you need a 3mm brim. If you want to put a light in it you doesn't need any bottem layers. The temps are going to differ on your filament, but you need to print it a bit hotter than normal to make it look better. I recoment to use translusent filament, but no translusent should also work.
When the print is done, use a LED tea light or something like that and see it shine. (DO NOT USE A REAL TEA LIGHT ONLY THE LED TYPE)
* For the star you need 5 times the point and 1 middel