Print-in-place electrolytic capacitor organizer
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Handy drawers for your caps
- Ocena
- 0 / 5
- Polubienia
- 8
- Pobrania
- 36
- Wydruki
- 0
- Wyświetlenia
- 190
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Share Alike
The electrolytic capacitor organizer has 6 drawers, each with 4 compartments, of which 20 are pre-labeled with common values. The dimensions are 240mm wide, 60mm deep, and 71 mm high. The organizer can be attached to other organizers I designed with tie wraps as shown in the photos.
Resistor organizer: https://www.printables.com/model/983246-print-in-place-resistor-organizer
Ceramic capacitor organizer:https://www.printables.com/model/983369-print-in-place-ceramic-capacitor-organizer
I'll be publishing a fourth model soon that will be for odds & ends such as LEDs, diodes, etc.
The cabinet & drawers print all at once. Import electrolytic_caps.stl and electrolytic_caps_text.stl simultaneously into the slicer if you want colored text. electrolytic_caps_no_labels.stl should be used if you want to make your own labels.
This model is based on my OpenSCAD model for parametric print-in-place drawers: https://makerworld.com/en/models/481479#profileId-397133