Print-in-place electrolytic capacitor organizer
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Handy drawers for your caps
- Rating
- 0 / 5
- Likes
- 8
- Downloads
- 36
- Makes
- 0
- Views
- 189
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Organizers
- License
- Creative Commons — Attribution — Share Alike
The electrolytic capacitor organizer has 6 drawers, each with 4 compartments, of which 20 are pre-labeled with common values. The dimensions are 240mm wide, 60mm deep, and 71 mm high. The organizer can be attached to other organizers I designed with tie wraps as shown in the photos.
Resistor organizer: https://www.printables.com/model/983246-print-in-place-resistor-organizer
Ceramic capacitor organizer:https://www.printables.com/model/983369-print-in-place-ceramic-capacitor-organizer
I'll be publishing a fourth model soon that will be for odds & ends such as LEDs, diodes, etc.
The cabinet & drawers print all at once. Import electrolytic_caps.stl and electrolytic_caps_text.stl simultaneously into the slicer if you want colored text. electrolytic_caps_no_labels.stl should be used if you want to make your own labels.
This model is based on my OpenSCAD model for parametric print-in-place drawers: https://makerworld.com/en/models/481479#profileId-397133