ADALM2K Storage Container
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Wall mount storage container for ADALM2000.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 8
- Wydruki
- 0
- Wyświetlenia
- 73
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution
Since I ran out of counter space, I started creating wall mount storage containers for some of the tools I use regularly. This box is for an ADALM2000 (Analog Devices Active Learning Module). There is a slot at the back of the container for the dupont connectors provided with the unit, but since I usually leave them attached, the container also allows the ADALM2000 to be inserted with the cables hanging down.
Print Settings
Printer Brand:
Prusa
Printer:
I3 MK3S
**Rafts:**
No
Supports:
No
**Resolution:**
200
Infill:
15
**Filament:** PolyMaker PLA
Notes:
I printed this storage container with the bottom on the print bed (so it was in the same orientation as when it is in use). No supports were required in that orientation.
Category: Tool Holders & Boxes