ADALM2K Storage Container
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Wall mount storage container for ADALM2000.
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 8
- Makes
- 0
- Views
- 73
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution
Since I ran out of counter space, I started creating wall mount storage containers for some of the tools I use regularly. This box is for an ADALM2000 (Analog Devices Active Learning Module). There is a slot at the back of the container for the dupont connectors provided with the unit, but since I usually leave them attached, the container also allows the ADALM2000 to be inserted with the cables hanging down.
Print Settings
Printer Brand:
Prusa
Printer:
I3 MK3S
**Rafts:**
No
Supports:
No
**Resolution:**
200
Infill:
15
**Filament:** PolyMaker PLA
Notes:
I printed this storage container with the bottom on the print bed (so it was in the same orientation as when it is in use). No supports were required in that orientation.
Category: Tool Holders & Boxes