Paper Towel Holder for Multiboard (and HoneyComb) using MultiConnect
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Paper towel holder for Multiboard (and Honeycomb) mounting system using MultiConnect
- Ocena
- 5 / 5
- Polubienia
- 159
- Pobrania
- 957
- Wydruki
- 12
- Wyświetlenia
- 3258
- Oceny
- 12
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Noncommercial
Your standard paper towel holder that you can mount vertically on your favorite vertical storage system – Multiboard or Honeycomb
I specifically used Multiboard, but with MultiConnect system, these can be mounted on the storage system of your choice.
Paper Towel
Fits standard-size and Costco-size paper towel with approximately 6 inch diameter and more than 1 inch hollow core.
Print Instructions
These are personal settings, but there is no constraint on any specific material or settings.
Material: PLA
Print Settings: 3 Wall loops, 15% Cubic Infill, 0.2 mm Layer Height with 0.4mm nozzle.
Additional Accessories
You'll require 4 MultiConnect board connectors based on your wall storage type. They can be downloaded from here.