1 / 1
Aufputz-Federdeckel für Schalterdosen / On-wall spring cover for switch boxes — zdjęcie 1

Aufputz-Federdeckel für Schalterdosen / On-wall spring cover for switch boxes

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Aufputz-Federdeckel für Schalterdosen / On-wall spring cover for switch boxes

Ocena
0 / 5
Polubienia
0
Pobrania
9
Wydruki
0
Wyświetlenia
182
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

This is a on-wall spring cover for switch boxes.

I needed one where the space inside the switch box was too small, but I still wanted to have some cable management. Thus it features 2 holes of 23.2mm and 28.5mm on each side to make cables accessible, but still covered, as shown in the picture. The gap makes it easy to screw onto existing mounting positions, especially because the mounting area can be moved on demand. You can print the lid to cover this gap to keep the dust out :)

Print:

  • 0.8mm nozzle, 0.4mm layer, MK4, Quality profile
  • PLA

 

Tagi