Mini Lathe Bearing Retainer
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
After breaking both bearing retainers, including the one on the spindle after the bearing had been seated, I designed…
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 50
- Wydruki
- 0
- Wyświetlenia
- 177
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Share Alike
After breaking both bearing retainers, including the one on the spindle after the bearing had been seated, I designed these 3 bearing covers. The simple retainer is a disk without ribs and is the version I recommend for speed. The hollow version is based on the injection molded version with hollows and ribs. Lastly, the split version is for when you're like me and break the bearing retainer with the bearing already installed, so it uses 2 M3 screws and heat set inserts to clamp around the spindle if you need. ABS or Nylon is recommended as the spindle housing can become warm enough to warp PLA.
Print Settings
Printer Brand:
Creality
Printer:
K1
No
Supports:
No
.2
Infill:
15
Notes:
Print with the counter bores facing down as shown in the picture. The counterbores have a single bridge to help support them, so punch through the layer with a knife and trim any excess material.
Category: Machine Tools