Articulating Raspberry Pi Camera Bibo 2 Touch mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a bracket that will connect to the corner of the BIBO 2 Touch printer. It is designed to be used with…
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 10
- Wydruki
- 0
- Wyświetlenia
- 107
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial
This is a bracket that will connect to the corner of the BIBO 2 Touch printer. It is designed to be used with "Articulating Raspberry Pi Camera Mount for Prusa MK3 and MK2."
I used 2 of the enclosure mounting holes and replaced the original screws with 3m 20mm screws.
I am using it to hold a touchscreen, but it could also be used to mount a camera. I used PETG, but any filament type should work.
Print Settings
Printer:
Bibo 2 Touch
Rafts:
No
Doesn't Matter
Resolution:
0.15mm
20%
Filament: Amazon Basics PETG Black
Notes:
I manually added supports for the holes, but that may not be needed.
Category: 3D Printer Accessories