Articulating Raspberry Pi Camera Bibo 2 Touch mount
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a bracket that will connect to the corner of the BIBO 2 Touch printer. It is designed to be used with…
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 10
- Makes
- 0
- Views
- 107
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Attribution — Noncommercial
This is a bracket that will connect to the corner of the BIBO 2 Touch printer. It is designed to be used with "Articulating Raspberry Pi Camera Mount for Prusa MK3 and MK2."
I used 2 of the enclosure mounting holes and replaced the original screws with 3m 20mm screws.
I am using it to hold a touchscreen, but it could also be used to mount a camera. I used PETG, but any filament type should work.
Print Settings
Printer:
Bibo 2 Touch
Rafts:
No
Doesn't Matter
Resolution:
0.15mm
20%
Filament: Amazon Basics PETG Black
Notes:
I manually added supports for the holes, but that may not be needed.
Category: 3D Printer Accessories