Shaker Cabinet Door Gluing Jig for 1x3
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Right-angle brackets for clamping and gluing shaker cabinet doors made of 1x3 boards (0.75" by 2.5" real dimensions)
- Ocena
- 0 / 5
- Polubienia
- 9
- Pobrania
- 38
- Wydruki
- 0
- Wyświetlenia
- 298
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution
I needed to build a bunch of shaker-style cabinet doors, which of course requires a lot of lining up, gluing, and clamping. To make things easier, I made a right-angle jig that can help hold the boards in proper alignment both for a dry test fit and for final glue-up.
Designed for use with 1x3 boards (actual dimensions 0.75" by 2.5" because reasons)
Printed four of them with 4 inner walls, 30% cubic support.
Includes a “window” so you can check the joint from the back side, mounting holes if you want to screw one (or more?) to your bench, and a support shelf for the interior board of the door.
