Shaker Cabinet Door Gluing Jig for 1x3
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Right-angle brackets for clamping and gluing shaker cabinet doors made of 1x3 boards (0.75" by 2.5" real dimensions)
- Rating
- 0 / 5
- Likes
- 9
- Downloads
- 38
- Makes
- 0
- Views
- 300
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution
I needed to build a bunch of shaker-style cabinet doors, which of course requires a lot of lining up, gluing, and clamping. To make things easier, I made a right-angle jig that can help hold the boards in proper alignment both for a dry test fit and for final glue-up.
Designed for use with 1x3 boards (actual dimensions 0.75" by 2.5" because reasons)
Printed four of them with 4 inner walls, 30% cubic support.
Includes a “window” so you can check the joint from the back side, mounting holes if you want to screw one (or more?) to your bench, and a support shelf for the interior board of the door.
