Signify - Porcupine Tree Album Art
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Orientacyjna cena wydruku pliku
0,08 € – 0,09 € netto (bez VAT)
Dla pliku: signify-beige.bgcode
To wstępna wycena jednego pliku. Dokładną cenę poznasz przed zamówieniem.
Plik i założenia wyceny
Plik użyty do wyceny
Średnia wycena orientacyjna: 0,09 € netto (środek widełek).
- Masa podana przez autora
- 1 g
- Czas druku podany przez autora
- 5,4 min
- Materiał u źródła
- PLA
- Materiał wyceny
- PLA
- Drukarka wyceny
- Bambu Lab P1S - 0.4 nozzle
- Proces wyceny
- 0.20mm Standard
Orientacyjna wycena wyłącznie wybranego pliku, oparta na masie i czasie druku podanych przez autora. Warianty plików nie są sumowane. Ostateczna cena zostanie obliczona po analizie pliku.
Zapisane na tym urządzeniu.
💿 🎵 Easy-to-print, part of a collection representing British musician Steven Wilson's discography. No supports. 🎸🟫
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 10
- Wydruki
- 0
- Wyświetlenia
- 65
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- 2D Plates & Logos
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
Signify - 1996
Crushed like a rose,
in the river flow,
I am I know
I love Steven Wilson and Porcupine Tree's music, so I created a set of 3D printable abstractions to represent his discography.
Unlike my previous beverage coasters, these Porcupine Tree ones are just for display as 2.5D art. It is square like a CD or vinyl album sleeve.
I recreated all of Porcupine Tree's albums in a way that are interesting for 3D printing:
- only two or three colors
- highlights the most recognizable element by “sticking” out of the background
- interesting infills, top patterns and other unusual, experimental approaches
- no supports
- print in parts, use pause-and-change filament, or with MMU/AMS
- glue is needed for a final assembly if printing in parts
If you like Steven Wilson's work, don't miss my other album covers.
--------Print instructions----------
Without input shaper, printing slow to help definition, 20mm/s for example.
Infill at least 15% to hold top layers or text above, but you can play with patterns and higher percentages. I left some open tops to expose the infill some times!
I didn't use brims or rafts, but you can if you experience warping, especially in the square corners. Temporary water-based adhesive is useful too.
- No supports
- Pause-and-change-filament at certain heights to have different colors, even with a regular FDM setup. With MMU it's even easier
- Scale to whatever size is convenient for you. If the height is too deep you can scale it down in the Z axis
- Feel free to experiment with colors and top fill patterns
- Adaptive layers can help speed up through just square parts, and then have more resolution on text above.
I printed the one you see in my photos in two parts. The square background has some exposed gyroid infill to create contrast. It has no top layers. The woman is a separate print in a beige color. Glued together.
Modeled by Mexican designer Dany Sánchez, creator of MiniWorld3D & OpenFigure3D.
Follow me on Instagram!
Any Related Indicia are Trademarks of their respective owners. This model is a non for profit, fan work modeled from scratch inspired by album art. No trademark infringement is intended.