Headphone Stand with Weighted Base
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Created 4mm recess to add two 4" octagonal metal electric box covers to provide weight to base.
- Ocena
- 5 / 5
- Polubienia
- 10
- Pobrania
- 63
- Wydruki
- 1
- Wyświetlenia
- 822
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Music
- Licencja
- Creative Commons — Attribution
Created 4mm recess to add two 4" octagonal metal electric box covers to provide weight to base without making base taller. Just epoxy them in and now the base is weighted so it will resist tipping.
I also glued on a cork bottom to keep base from marring or slipping.
Box cover examples:
Lowes:
https://www.lowes.com/pd/RACO-1-Gang-Round-Metal-Electrical-Box-Cover/3127567
Home Depot:
https://www.homedepot.com/p/RACO-4-in-Octagon-Flat-Blank-Cover-722/100133531
Idea Credits:
I loved the design of the original Headphone Stand by DusterLE and saw this remix by mmakaj with a flat base that allowed the base to be printed vertically. This gave me the idea to make an additional modification to create an inset for weight now that I didn't have to worry about supports.
Print Settings:
Resolution: 0.20
Infill: 15%
Supports: No
Rafts: No