Thor hammer switch holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
switch holder
- Ocena
- 0 / 5
- Polubienia
- 11
- Pobrania
- 38
- Wydruki
- 0
- Wyświetlenia
- 432
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Toys & Games
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
I designed a Thor hammer where you can put 36 switch games in one side and the other side you can put the switch and controllers.
The handle is in 2 pieces that screw together so you can always take it apart when transporting so it takes less place.
The side pieces close with magnets of 8mm by 2mm that fit in every corner.
The body i made in 2 pieces so it can be printed with less supports and made slots in it so it is easier to put in place.
i printed mine with a 0.4mm nozzle, 0.2mm layer height and 15% infill and some pieces will need supports.
If you like a commercial license for selling pleas join my Thangs membership plan: https://thangs.com/designer/3D%20prints%20and%20gifts