1 / 1
osVACneo No Name Vacuum Adapter 56.25mm - 58.00mm
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is an adapter for the osVACneo system for my old no name shop vacuum adapter.
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 41
- Wydruki
- 0
- Wyświetlenia
- 190
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial
This is an adapter for the osVACneo system for my old no name shop vacuum adapter.
The adapter should fit a 57mm hole in the shop vacuum. As my vacuum is possible over 40 years old and the hose was removed a lot of times there is a lot of wiggle room in the hole so i made the adapter conically to shove the adapter as far in as possible to get a good seal.