1 / 1
Spiral Wound Pool Vacuum Hose Repair Coupler
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
1 1/2" spiral wound pool vacuum hose coupler for repair
- Ocena
- 4 / 5
- Polubienia
- 8
- Pobrania
- 93
- Wydruki
- 1
- Wyświetlenia
- 356
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor & Garden
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
SzczegółyPliki (1)Wydruki i komentarze (Wydruki: 1) (Komentarze: 2)Remiksy (0)Kolekcje (21)Powiązane
Spiral wound 1 ½" coupler for pool vacuum hose.
It can be used to join two sections of spiral wound hose.
For best performance, use silicon on the coupling to ensure a good seal.
In a properly calibrated printer, make sure to over-extrude about 1% as to make the coupling as water-tight as possible.
