1 / 9
zipper pull replacement/fix
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A replacement for a broken zipper pull tab
- Ocena
- 0 / 5
- Polubienia
- 14
- Pobrania
- 63
- Wydruki
- 2
- Wyświetlenia
- 719
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
SzczegółyPliki (7)Wydruki i komentarze (Wydruki: 2) (Komentarze: 2)Remiksy (0)Kolekcje (16)Powiązane
first i made one out of pla but the piece broke it was not strong enough for regular use so I printed a tpu version which was much much harder to break but the quality was awful so I redesigned it to be easier to print with the logo on only one side and made it being a bit thicker I recommend you print this one if you dont have tpu but I also uploaded a version of that with a smaller gap as tpu is less rigid. I also added a version of the TPU one with a block where the letters were because my printer couldn't handle the letters properly.