1 / 1
Hand of Clatronic Knetmaschine KM 3711 — zdjęcie 1

Hand of Clatronic Knetmaschine KM 3711

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Hand of Clatronic Knetmaschine KM 3711

Ocena
3 / 5
Polubienia
4
Pobrania
36
Wydruki
0
Wyświetlenia
110
Oceny
1

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Kitchen
Licencja
GNU General Public License v3.0

This part of machine is fragile and will eventually break after years of usage.
So you can simply print it again. I have tried to glue the original part with no success.
Printing it is a better solution.

Hint:

MUST BE PRINTED IN 100% INFILL.
The printed part is tighter than the metal rode of the machine. The metal rode should be heated with a soldering iron or with a lighter for at least 200c degrees, then the plastic handle inserted with force.

I will be looking for an alternative way. By having the plastic mouth to be not tight (wider) but in that case it needed to be glued with an epoxy or super glue.

Tagi