Nintendo Switch OLED car mount with retention clips
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Remix for the OLED model based upon the original design by A2S_dESING, utilising the original headrest attachment.
- Ocena
- 0 / 5
- Polubienia
- 22
- Pobrania
- 180
- Wydruki
- 0
- Wyświetlenia
- 922
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Portable Devices
- Licencja
- Creative Commons — Attribution — Noncommercial
Redesigned from scratch for the OLED variant's dimensions and features such as speaker ports and vents. Added retention clips to hold the device in the mount for added safety. Retained the original aesthetic although slightly modified, with a thicker backplate and stiffener bar for the top opening. Two versions for full and small form factor printers including custom support.
When printing the Mini, please reject support on the rear faces, I allowed tree support for otherwise overhanging areas and especially for the retaining clips. Printing at this angle ensures clips have the correct XY orientation for strength.
Order of walls set to Outer/Inner when printing mini.
Printed in PETG.