Stackable riser/turntable for resin 3d printer UV curing stations
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Adds additional platform(s) to allow you to cure more models at once!
- Ocena
- 5 / 5
- Polubienia
- 43
- Pobrania
- 229
- Wydruki
- 1
- Wyświetlenia
- 965
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution
--edited--
My 3rd iteration of the curing riser is for the Elegoo "Mercury Plus 3" wash and cure station. However, you should be able to scale it a bit to make it work on any curing station with a round turntable. The files are for a 256mm diameter turntable, so scale based on that.
I recommending printing:
1x v3 base (goes on the turntable)
1x v3 133mm riser (for 2 levels of curing)
2x v3 87mm riser (for 3 levels of curing)
The photos of the 3 level risers are actually 97mm, which i think is too much so i created the 87mm.
I don't recommend anyone use v1 ("old") files.
I printed this in PLA. i don't know the best filament, but white/clear is probably best for reflectivity.