Stackable riser/turntable for resin 3d printer UV curing stations
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Adds additional platform(s) to allow you to cure more models at once!
- Rating
- 5 / 5
- Likes
- 43
- Downloads
- 229
- Makes
- 1
- Views
- 965
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution
--edited--
My 3rd iteration of the curing riser is for the Elegoo "Mercury Plus 3" wash and cure station. However, you should be able to scale it a bit to make it work on any curing station with a round turntable. The files are for a 256mm diameter turntable, so scale based on that.
I recommending printing:
1x v3 base (goes on the turntable)
1x v3 133mm riser (for 2 levels of curing)
2x v3 87mm riser (for 3 levels of curing)
The photos of the 3 level risers are actually 97mm, which i think is too much so i created the 87mm.
I don't recommend anyone use v1 ("old") files.
I printed this in PLA. i don't know the best filament, but white/clear is probably best for reflectivity.