Dual Labeled SD Card Case - Zippo Style
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Holds up to two SD cards and has replacable paper labels.
- Ocena
- 0 / 5
- Polubienia
- 36
- Pobrania
- 141
- Wydruki
- 0
- Wyświetlenia
- 622
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Photo & Video
- Licencja
- Creative Commons — Attribution — Share Alike
Keep your SD cards safe on the go with the stylish Zippo case!
The zippo case allows you to keep up to two standard sd cards, feature an grip mechanism to stop the cards from falling out, as well as shuts cloosed woth powerful magnets.
This version of the zippo case also allows you to put in two paper labels! just take any piece of paper, cut it to size, mark it however you want and that's it. rapidly removable and switchable, in order to allow you to update the labels according to you SD cards and workflow.
Size for paper labels - 2.8*2.5 cm or 1.1*0.9 inches.
Steps after printing:
- clean all stringing. sometimes small strands can get into the label slits and block the paper. the solution for that is going around the hole with an exacto knife.
2. attach 2 2x6 mm magnets to the fitting holes, no need for glue, although tolerances may vary according to your printer. make sure the magnets are put inside with the correct poles turning to each other.