20mm Bit Holder (LTT Bit Storage) Square with Magnets (Parametric)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Square 20mm (LTT) Bit Holder. A square, lower volume version of the original.. with magnets!
- Ocena
- 4,667 / 5
- Polubienia
- 18
- Pobrania
- 101
- Wydruki
- 3
- Wyświetlenia
- 552
- Oceny
- 3
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Square 20mm (LTT) Bit Holder
UPDATE: Added Parametric Fusion files for any number of rows/columns! Logo can also be enabled/disabled via parameters.
A square, lower volume version of the original.. with magnets!
Had 1 too many instances where a few, or all, of the bits would fall out in my bag. 1 magnet is more than enough to hold the bits in, even when being shaken upside-down. Use 6x2mm magnets. Only 1 magnet is needed, but I've included models for 0-2 magnets. (All versions in the .blend file as well)
I recommend alternating polarity when laying out the magnets, so 2 cases can be attached to one another. Cause why not \_(ツ)_/.
Example magnet layout (make sure all holders match):
🟢🔴🟢🔴🟢🔴🟢🔴🟢🔴🟢🔴
🔴🟢🔴🟢🔴🟢🔴🟢🔴🟢🔴🟢
Includes versions with the names of the bits sold by LTT engraved in the top and sides of the outer shell.
A template version can also be found in the .blend file if you're familiar with blender. Just edit the Text using tab, convert to mesh, boolean difference, done.
Print Settings
Supports:
No
Notes:
Print outer shell standing upright for best results for the logo.
All models should be loaded in correct printing orientation.
Category: Tool Holders & Boxes