Shower Knob Replacement for Price Pfister
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
UPDATE: The original handle failed after about 3 months, avg to low use. The tolerance on the key was too loose. I…
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 25
- Wydruki
- 0
- Wyświetlenia
- 175
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Bathroom
- Licencja
- Creative Commons — Attribution
Auto-imported from Thingiverse.
Handle printed at time of last update on thingiverse is still going strong. Has been used daily for nearly 2 years without issue.
UPDATE: The original handle failed after about 3 months, avg to low use. The tolerance on the key was too loose. I tightened the key up a bit, but could probably be tightened up a bit more.I ended up just shoving a 1-2 layer thick piece of scrap plastic in with the key to get a really snug fit.
Only the file shower_handle_HotCold_with_Twist.stl and the *.blend files have been updated. All other files still have the old loose fitting key.
Unable to find a suitable replacement handle at a reasonable price I decided to take measurements from my broken handle and attached the "Key" for my valve to this handle.
There's a tiny bit of play in the handle, but it fits and works great!
Added text and arrows for "Hot"/"Cold" as well as "Twist", so hopefully someone doesn't rip it off the wall... a 3rd time.
Versions included:
- Hot/Cold with Arrows and "Twist" text
- Cold/Hot with Arrows and "Twist" text.
- Hot/Cold with Arrows Only
- Cold/Hot with Arrows Only
Blank Face Print Settings
Printer Brand:
Creality
Printer:
Ender 3 Pro
**Rafts:**
Doesn't Matter
Supports:
Yes
**Resolution:**
.2
Infill:
20%
Notes:
Supports are probably not needed. I printed with them for the screw insert, but it messed up the arrows on my print. So I tried to clean it up (not well) with a soldering iron (as seen in the unpainted photo).
Post-Printing
Category: Bathroom