Archery Quiver for BFG Single Point Sling
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Quiver designed to use the Blue-Force Gear single point sling.
- Ocena
- 0 / 5
- Polubienia
- 17
- Pobrania
- 56
- Wydruki
- 0
- Wyświetlenia
- 504
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Creative Commons — Public Domain
The components are designed with a very close fit to standard 1 ½" ABS drainage pipe. Some sanding required.
In my example I printed the components in ASA, used plumbing abs glue to attach them.
I have only actually printed and tried the simple inlet. I haven't had a reason to print one of the flared, but I think they would help a bit for putting arrows back. I eventually will try the flared to see how it works.
Pipe length is more of a personal preference and easy enough to experiment with to find the right fit.
Most of the components are designed to be printed without supports. However the QD should be printed with the large flat on the build plate. Support for starting the QD shape is strongly recommended. You might have to adjust cooling for the QD as mine started to get a big hot and sag. This didn't prevent the QD from working so I used it anyways.