Thumb screw with turn indication for hex bits
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Wanted a short hex holder and indicator to turn the screws on my heatbed.
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 15
- Wydruki
- 1
- Wyświetlenia
- 202
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution
I wanted a shorter something to hold on to my hex bits when turning the screws on my MK3S heatbed for levelling.
I'm using this guide as a reference: https://github.com/PrusaOwners/prusaowners/wiki/Bed_Leveling_without_Wave_Springs
I also wanted some sort of indicator to know approximately how far I'd turned the screw between each levelling pass, so there's a compass style indicator on the top, thicker line for 0° to 180° to keep track of how far I've turned the bit.
This simple solution holds a for my purpose 4 mm hex bit as well as a more generic 62 mm bit.
Both sizes are here, as well as the Fusion 360 file :)
Printing Instructions
Layer height: 0,2 mm
Infill: 25%
Material: PETG
Print with top side facing downwards and no supports!