1 / 1
ESPHome rotary encoder button — zdjęcie 1

ESPHome rotary encoder button

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

This is a case for ESP32C3 Super mini with a EC11 rotary encoder.

Ocena
0 / 5
Polubienia
5
Pobrania
27
Wydruki
0
Wyświetlenia
402
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Electronics
Licencja
Creative Commons — Attribution — Share Alike

This is a button for HomeAssistant. 

Screws are M2-8

The MCU is ESP32-S3 Super mini.

The print may require some post-processing to fit the MCU snuggly (every board is cut a little bit differently).

Knob is this one. 

Tagi