Creality K1 LIDAR mount (remixed)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a remix of creality-k1-max-ai-lidar-mounting-plate as the holes didn't line up with the LIDAR unit
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 259
- Wydruki
- 0
- Wyświetlenia
- 706
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Creality Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I printed the original version out but the holes to mount the LIDAR unit didn't line up.
So I moved the holes around to fit correctly.
I also made the mount 2mm thick to give it a little more stability.
Finally in the v2 I also added some additional support to the back of the mount to keep it more stable
I printed it with the largest face down on the print bed, which is how the model is aligned.
I did use tree supports, but they are probably not needed.
I printed it in Prusa orange ASA.
I used 3 walls and 40% infill (not that there would be much infill)