D-Pad Riser for FunnyPlaying FPGBC
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Prevents accidental diagonals on the FPGBC D-Pad.
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 57
- Wydruki
- 0
- Wyświetlenia
- 341
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Video Games
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
The stock d-pad on my FPGBC could be pressed down activating all directions at the same time. This made playing games like Tetris very frustrating. I would be pressing left or right, and it would often register up, causing a hard drop.
I first attempted to fix this by partially covering the d-pad contacts with kapton tape, and using a bit of electrical tape to prevent the d-pad from being pressed straight down. This kind of worked, but it sacrificed sensitivity and made diagonals very difficult.
I found this model https://www.thingiverse.com/thing:4710169 which seemed like it might work. The dimensions were slightly off for my FPGBC, so I made a new model to fit it. I've included a few different heights. The one that worked best for me is 0.12mm.