D-Pad Riser for FunnyPlaying FPGBC
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Prevents accidental diagonals on the FPGBC D-Pad.
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 57
- Makes
- 0
- Views
- 341
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Video Games
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
The stock d-pad on my FPGBC could be pressed down activating all directions at the same time. This made playing games like Tetris very frustrating. I would be pressing left or right, and it would often register up, causing a hard drop.
I first attempted to fix this by partially covering the d-pad contacts with kapton tape, and using a bit of electrical tape to prevent the d-pad from being pressed straight down. This kind of worked, but it sacrificed sensitivity and made diagonals very difficult.
I found this model https://www.thingiverse.com/thing:4710169 which seemed like it might work. The dimensions were slightly off for my FPGBC, so I made a new model to fit it. I've included a few different heights. The one that worked best for me is 0.12mm.