Kandar B3 - Trigger Guard
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A friend asked me for help with the renovation of an air rifle - fortunately, most of it was still intact.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 95
- Wydruki
- 1
- Wyświetlenia
- 301
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Mechanical Parts
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
As I mentioned earlier, my friend fortunately had most of the original trigger guard intact, so I was able to measure the important parts. The lower part of the trigger guard on my model is a bit looser, but it doesn't affect its functionality. I printed the trigger guard horizontally with a 0.15mm gap between the model and the support, with layers also at 0.15mm and 3 perimeters.
Also, I chose a non-commercial license—after all, this is a part for a firearm, and I would prefer not to get anyone into trouble in your country.